How to use: Position the hole so that the blackhead is in the center and push until the ring of the blackhead remover fills with impurities.
Once finished, wash your face with soap, preferably antibacterial.
You can You can also use a cotton ball soaked in the toner.
Cleaning and Sterilization:
Clean the instrument thoroughly.
If using specific detergents, carefully follow the manufacturer's instructions;
Steam sterilization using an autoclave is recommended.
If using sterilizing powders or liquids, carefully follow the manufacturer's instructions to avoid the risk of corrosion;
Clean the instrument under running water and dry it, taking care to remove all residual water and/or moisture.
We recommend using AIRY compressed air spray, code 156060.
Lubricate the parts subject to friction.
We recommend using silicone lubricant, code 654076 or the lubricating pen code 10416.
Warnings Residues of water, condensation, and/or humidity must be removed with particular care. Otherwise, rust may form, which can quickly corrode the steel.