Spedizione standard in 24/72h a 4,99€, gratuita sopra i 99€. Per arredi e colli voluminosi la consegna può richiedere dai 3 ai 5 giorni.
11cm Stainless Steel Double-Tip Comedone Extractor
11cm Stainless Steel Double-Tip Comedone Extractor
Categoria:
SPINGI CUTICOLE
€ 5,49
-26%
€ 4,06 (Vat included)
€ 5,49
-26%
€ 4,06 (Vat included)
Purchase and earn 3 points
DISPONIBILE ANCHE CON FORMULE DI NOLEGGIO
Descrizione
Blackhead Remover - Length 11 cm
Autoclavable stainless steel blackhead remover.
Equipped with:
Position the hole so that the blackhead is in the central area and push until the ring of the blackhead remover fills with impurities.
Once finished, wash your face with a soap, preferably antibacterial.
You can also use a cotton ball soaked in toner.
Cleaning and Sterilization:
Residues of water, condensation, and/or humidity must be removed with particular care. Otherwise, rust may form which can corrode the steel even in a short time.
Contents
1 x STL3011 (Blackhead Remover)
Maintenance Accessories
STL6060 - Compressed Air Spray
STL4076 - Silicone Lubricant
STL0416 - Lubricating Pen
Autoclavable stainless steel blackhead remover.
Equipped with:
- thin tip;
- thick tip.
Position the hole so that the blackhead is in the central area and push until the ring of the blackhead remover fills with impurities.
Once finished, wash your face with a soap, preferably antibacterial.
You can also use a cotton ball soaked in toner.
Cleaning and Sterilization:
- Clean the instrument thoroughly.
If you use specific detergents, carefully follow the manufacturer's instructions; - Steam sterilization is recommended using autoclave.
If sterilizing powders or liquids are used, strictly follow the manufacturer's instructions to avoid the risk of corrosion; - Clean the instrument with running water and dry it, taking care to remove all traces of water and/or humidity.
We recommend using AIRY spray compressed air, code 156060. - Lubricate the parts subject to rubbing.
We recommend using silicone lubricant, code 654076, or the lubricating pen, code 10416.
Residues of water, condensation, and/or humidity must be removed with particular care. Otherwise, rust may form which can corrode the steel even in a short time.
Contents
1 x STL3011 (Blackhead Remover)
Maintenance Accessories
STL6060 - Compressed Air Spray
STL4076 - Silicone Lubricant
STL0416 - Lubricating Pen
Dettagli
| 0,6 | |
| 17,8 | |
| 4,5 | |
| 0,02 | |
| 0 | |
Condividi su
PRODOTTI CORRELATI
€ 6,51
-25%
€ 4,88 (Vat included)
€ 6,65
-42%
€ 3,86 (Vat included)
€ 5,49
-26%
€ 4,06 (Vat included)
€ 5,88
-28%
€ 4,23 (Vat included)
Articolo aggiunto al carrello